manualshive.com logo in svg

Siemens SINAMICS S110, Список руководств

Siemens SINAMICS S110 - высококачественный частотный преобразователь, обеспечивающий эффективное управление двигателями. Чтобы получить более подробную информацию и настроить устройство, вы можете скачать руководство по эксплуатации бесплатно с manualshive.com. Узнайте больше о возможностях этого устройства!

Поделиться
Скачать
background image

List of faults and alarms

Faults and alarms

3-1035

© Siemens AG 2012 All Rights Reserved
SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3

- check the configuration and communication at the PROFIsafe slave.
- check the setting of the value for F parameter F_WD_Time on the PROFIsafe slave and increase if necessary.
- evaluate diagnostic information in the F host.
- check PROFIsafe connection.
This message can be acknowledged as follows:
- motion monitoring functions integrated in the drive: Via Terminal Module 54F (TM54F) or PROFIsafe
- motion monitoring functions with SINUMERIK: Via the machine control panel
See also: p9300 (SI Motion monitoring clock cycle (processor 2)), p9500 (SI Motion monitoring clock cycle (proces-
sor 1))

C01712

SI Motion CU: Defect in F-IO processing

Message value:

%1

Drive object:

SERVO_S110-CAN, SERVO_S110-DP, SERVO_S110-PN

Reaction:

NONE

Acknowledge:

IMMEDIATELY (POWER ON)

Cause:

When cross checking and comparing the two monitoring channels, the drive detected a difference between param-
eters or results of the F-IO processing and initiated a STOP F. One of the monitoring functions no longer reliably 
functions - i.e. safe operation is no longer possible.
The safety message C01711 with message value 0 is also displayed due to initiation of STOP F.
If at least one monitoring function is active, the safety message C01701 "SI Motion: STOP B initiated" is output after 
the parameterized timer has expired.
Message value (r9749, interpret decimal):
Number of the cross-checked data that resulted in this message.
1: SI discrepancy monitoring time inputs (p10002, p10102).
2: SI acknowledgement internal event input terminal (p10006, p10106).
3: SI STO input terminal (p10022, p10122).
4: SI SS1 input terminal (p10023, p10123).
5: SI SS2 input terminal (p10024, p10124).
6: SI SOS input terminal (p10025, p10125).
7: SI SLS input terminal (p10026, p10126).
8: SI SLS_Limit(1) input terminal (p10027, p10127).
9: SI SLS_Limit(2) input terminal (p10028, p10128).
10: SI Safe State signal selection (p10039, p10139).
11 SI F-DI input mode (p10040, p10140).
12: SI F-DO 0 signal sources (p10042, p10142).
13: Different states for static inactive signal sources (p10006, p10022 ... p10028).
14: SI discrepancy monitoring time outputs (p10002, p10102).
15: SI acknowledgment internal event (p10006, p10106).
16: SI test sensor feedback signal test mode selected for test stop (p10046, p10146, p10047, p10147).
17: SI delay time for test stop at DOs (p10001).
18 ... 25: SI test sensor feedback signal (p10046, p10146, p10047, p10147). Expected state of internal readback 
signal, generated from the selected test stop mode.
26 ... 33: SI test sensor feedback signal (p10046, p10146, p10047, p10147). Expected state of external readback 
signal, generated from the selected test stop mode.
34 ... 41: SI test sensor feedback signal (p10046, p10146, p10047, p10147). Expected state of second internal read-
back signal, generated from the selected test stop mode.
42: Internal data for processing the second internal readback signal, generated from the selected test stop mode 
(p10047, p10147).
43: Internal data for processing the internal readback signal, generated from the selected test stop mode (p10047, 
p10147).
44: Internal data for processing the external readback signal, generated from the selected test stop mode (p10047, 
p10147).
45: Internal data for initialization state of test stop mode, dependent upon test stop parameters.
46: SI digital inputs debounce time (p10017, p10117)
47: Selection F-DI for PROFIsafe (p10050, p10150)
48: Selection F-DI for PROFIsafe (p10050, p10150)
49: SI SDI positive input terminal (p10030, p10130).
50: SI SDI negative input terminal (p10031, p10131).

Remedy:

- check parameterization in the parameters involved and correct if required.
- ensure equality by copying the SI data to the second channel and then carry out an acceptance test.
- check monitoring clock cycle in p9500 and p9300 for equality.

Содержание SINAMICS S110









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для SINAMICS S110

ABB ACQ80-01 Quick Installation And Start-Up Manual preview
ACQ80-01
Бренд: ABB Страницы: 13
LG GP65NB60 Manual preview
GP65NB60
Бренд: LG Страницы: 4
Panasonic LF-1600A Operating Instructions Manual preview
LF-1600A
Бренд: Panasonic Страницы: 28
Panasonic CW-7586-J Instruction Manual preview
CW-7586-J
Бренд: Panasonic Страницы: 16
Panasonic LF-1007AD Operating Instructions Manual preview
LF-1007AD
Бренд: Panasonic Страницы: 40
Panasonic LF-1004AB Instruction Manual preview
LF-1004AB
Бренд: Panasonic Страницы: 40
Panasonic KX-L840A Operating Instructions Manual preview
KX-L840A
Бренд: Panasonic Страницы: 36
Panasonic KX-L807A Operating Instructions Manual preview
KX-L807A
Бренд: Panasonic Страницы: 32
Panasonic KX-LRW21A Operating Instructions Manual preview
KX-LRW21A
Бренд: Panasonic Страницы: 40
Panasonic KX-LD740 Operating Instructions Manual preview
KX-LD740
Бренд: Panasonic Страницы: 40
Panasonic KX-LRW10A Operating Instructions Manual preview
KX-LRW10A
Бренд: Panasonic Страницы: 44
Panasonic KX-L783A Operating Instructions Manual preview
KX-L783A
Бренд: Panasonic Страницы: 36
Panasonic KX-L783M Operating Instructions Manual preview
KX-L783M
Бренд: Panasonic Страницы: 44
Panasonic KX-D721 Operating Instructions Manual preview
KX-D721
Бренд: Panasonic Страницы: 40
Orbitalum RPG 1.0 Operating Instructions With Spare Parts List preview
RPG 1.0
Бренд: Orbitalum Страницы: 32
Parker NK Series Technical Manual preview
NK Series
Бренд: Parker Страницы: 100
YASKAWA SERVOPACK Sigma 7 Series Product Manual preview
SERVOPACK Sigma 7 Series
Бренд: YASKAWA Страницы: 342
I/O Magic 24X10X40 User Manual preview
24X10X40
Бренд: I/O Magic Страницы: 34

Бренды по названию

Популярные бренды

Загрузить еще бренды