manualshive.com logo in svg

Siemens SINAMICS S110, Список руководств, Страница: 1006 / 1288

Поделиться
Скачать
Siemens SINAMICS S110 Скачать руководство пользователя страница 1006

Faults and alarms

List of faults and alarms

3-1006

© Siemens AG 2012 All Rights Reserved

SINAMICS S110 List Manual (LH7), 06/2012, 6SL3097-4AP10-0BP3

Example 2:
BICO output with voltage normalized unit in drive object 1 (DO1), BICO input with voltage normalized unit in drive 
object 2 (DO2). The reference values for voltage (p2001) of the two drive objects have different values. This means 
that the factor p2001(DO1)/p2001(DO2) is calculated between the BICO output and the BICO input.
p2001: contains the reference value for voltage, drive objects 1, 2
Fault value (r0949, decimal interpretation):
Parameter number of the BICO input (signal sink).

Remedy:

Not necessary.

Reaction upon A:

NONE

Acknowl. upon A:

NONE

A01514 (F)

BICO: Error when writing during a reconnect

Message value:

Parameter: %1

Drive object:

All objects

Reaction:

NONE

Acknowledge:

NONE

Cause:

During a reconnect operation (e.g. while booting or downloading - but can also occur in normal operation) a param-
eter was not able to be written to.
Example:
When writing to a double word BICO input in the second index, the memory areas overlap (e.g. p8861). The param-
eter is then reset to the factory setting.
Alarm value (r2124, interpret decimal):
Parameter number of the BICO input (signal sink).

Remedy:

Not necessary.

Reaction upon F:

NONE

Acknowl. upon F:

IMMEDIATELY

F01515 (A)

BICO: Writing to parameter not permitted as the master control is active

Message value:

-

Drive object:

SERVO_S110-CAN, SERVO_S110-DP, SERVO_S110-PN

Reaction:

NONE

Acknowledge:

IMMEDIATELY

Cause:

When changing the number of CDS or when copying from CDS, the master control is active.

Remedy:

If required, return the master control and repeat the operation.

Reaction upon A:

NONE

Acknowl. upon A:

NONE

A01590 (F)

Drive: Motor maintenance interval expired

Message value:

Fault cause: %1 bin

Drive object:

SERVO_S110-CAN, SERVO_S110-DP, SERVO_S110-PN

Reaction:

NONE

Acknowledge:

NONE

Cause:

The selected service/maintenance interval for this motor was reached.
Alarm value (r2124, interpret decimal):
Motor data set number.
See also: p0650 (Actual motor operating hours), p0651 (Motor operating hours maintenance interval)

Remedy:

carry out service/maintenance and reset the service/maintenance interval (p0651).

Reaction upon F:

NONE

Acknowl. upon F:

IMMEDIATELY

Содержание SINAMICS S110









































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов