Proximus Forum 500 Series, Руководство по монтажу и пусконаладке

Страница: 252 / 348

PIN Code Telephony
250 Telephony
Configuration
You can configure the “PIN Code Telephony” feature separately for each
company. Configuration is done with the following steps:
1. Call the Forum 5004/5008/5012 communications system Configurator .
On the introductory page, change the Level option to Expert .
2. Open the User manager : User groups menu page. Click on the New
button. Enter a designation into the Group name field and select an
existing user group as a template. Confirm with Apply .
3. Then click on the Change button. Select the desired Company . Activate
the PIN dial option for the time groups intended. Configure either external
authorisation or recording of Connection data . Confirm with Apply .
4. Open the Telephony : Extended : Companies menu page. Click on the
headline of the company desired (default: “Company 1”).
5. Under the PIN dial header, select the desired Route . Select the user group
created by the previous steps for the User group setting. Confirm with
Apply .
You can also use the “Standard” user group or the “External trunk” standard
route for the “PIN Code Telephony” feature. If you configure a special route,
you must also enter a seizure code for this route (
Telephony : Trunks : Route
menu, setting: Code ).
Activate the PIN dial user group option for all terminals which are to have the
“PIN Code Telephony” feature available to them. This can also be the “Guests”
user group. Furthermore, you can also use the “PIN Code Telephony” feature
for users who have no terminal assigned to them (“virtual users”).
Implementation
You would like to use the “PIN Code Telephony” feature from any telephone.
To do so, the telephone belonging to another user is switched to your personal
user account (“identity change”). Carry out the following steps:
1. Call the main menu on a system telephone. Select the 6 Connections :
7 PIN dialling menu entry. Enter your call number and your user PIN. If the
entry is correct, <PIN dialling> now appears. Now select the desired
external call number including the seizure route for the “External Trunk”
standard route.