manualshive.com logo in svg

Proximus Forum 500 Series, Руководство по монтажу и пусконаладке

Поделиться
Скачать
Proximus Forum 500 Series Скачать руководство пользователя страница 170

SIP Telephony

168

Voice over IP (VoIP)

page

.

 Activate “SIP phones”. Please also note the corresponding information 

in the “Forum 500 / Forum 5000 – Standard Terminals” user guide.

Alongside code number procedures, SIP subscribers can also use a series of 
functional features realized via the SIP protocol. The Forum 5004/5008/
5012 is the ending for all SIP connections as opposed to what is usually the 
case on the Internet. This enables SIP subscribers to use Forum 5004/5008/
5012 features. Direct data exchange is thus not possible between two SIP 
subscribers. The following table shows the possible features.

Features

Notes

Incoming and outgoing calls with call 
number display (CLIP)

A SIP telephone requires a call 
number display for CLIP.

Parallel connection of multiple SIP 
subscribers

SIP subscribers must be logged on 
under the same user identification.

Enquiry, toggling, call waiting, three-
party conference, reject

Operation or feature must be 
available on the SIP telephone or in 
the SIP software.

Call transfer

before and during a call; operation 
must be available.

Blind Transfer

SIP only: forwarding an incoming call 
without accepting the call; feature 
must be supported by SIP telephone 
or by the SIP software.

Keypad as “INFO” message

DTMF tones cannot be securely 
transferred “in band” via compression 
codecs. Digital “out band” transferral 
as “INFO” SIP message or via 
RFC 2833/4733 is supported. This 
feature must be available and acti-
vated on a SIP telephone or in the SIP 
software.

Содержание Forum 500 Series





























































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды