Configuration
U
pn
DECT and DECTover IP
®
215
General settings
●
Select the desired
WLAN Profile
and activate the
Profile Active
option.
●
Enter a
SSID
(Service Set Identifier, wireless network identification) to
identify a network. This network identification is transmitted at regular
intervals, making it easier to find the networks you’re looking for, using the
“View available wireless networks” function in Windows, for example.
●
For standard operation you should leave the following settings at their
default values:
VLAN Tag
at 0 (Off),
Beacon Period
at 100 ms,
DTIM
Period
at 5,
RTS Threshold
at 2347 (Off),
Fragmentation Threshold
at
2346 (Off) and
Interference Avoidance
on “Off”.
Tip:
If you are using only modern WLAN cards with 802.11g, you can
further speed up data transfer by configuring the setting
802.11
Mode
to “802.11g only”.
●
You can prevent the transmission of wireless network identification (SSID)
with the
Hidden SSID Mode
setting. This will however make network iden-
tification difficult and does not generally increase data security, so it is
preferable to leave this on the default setting of “Off”.
Security settings
On no account should you use
Open System
or
Wired Equivalent Privacy
(WEP)
settings
,
whether out of convenience or in order to avoid configuration
problems, unless of course you want to start up an Internet Cafe!
●
Activate the
Wifi Protected Access (WPA)
option.
●
Under
Type
select the “WPA v.2”setting.
●
For standard operation select the
Pre-Shared Key
option. Enter a
password in the
Value
input field and leave it set to
Text
. Use a password
with the following characteristics:
– No words or names that can be found in a dictionary
– At least 8 characters long
– It should also include numbers, a mixture of upper and lower case and
special characters
You could also use the
Generate
button
to generate a password. Some
WLAN configuration software does not convert text into hexadecimal
values as a standard procedure. If this is the case, go to the
Hex Value
setting and select the
Generate
button.
Содержание Forum 500 Series
Страница 1: ...Forum 5004 Forum 5008 Forum 5012 Mounting and Commissioning Manual ...
Страница 12: ...10 ...
