Proximus Forum 500 Series Скачать руководство пользователя страница 13 | Manualshive

Страница: 13 / 348

Proximus Forum 500 Series Скачать руководство пользователя страница 13

About this Manual

11

About this Manual

This user guide is intended for the technician installing the Forum 5004/
5008/5012 and putting it into operation. This will usually be the
responsibility of your Proximus agent, who will prepare the Forum 5004/
5008/5012 and hand over the configured, operational system.

The information on

●

installing the Forum 5004/5008/5012,

●

connecting terminals and putting them into operation, and

●

installing and configuring the software of components

is intended for these persons only.

Please note:

The Forum 5004/5008/5012 may be installed and serviced
by qualified Proximus personnel only!

For users of the Forum 5004/5008/5012, this manual provides useful
information with regard to routine tasks and procedures (e.g. configuring
teams). In addition, a list of frequently asked questions will help the user to
detect and eliminate faults that may arise.

«
...
11
12
13
14
15
...
»

Содержание Forum 500 Series





























































































































































































































































































































































Отзывы:

Нет отзывов