Proximus Forum 500 Series, Руководство по монтажу и пусконаладке

Страница: 228 / 348

Configuring DECT
226 DECT Networks
whether communication between DECT base stations and DECT terminals
is to be encrypted or not via the
Encryption option. Use Apply to confirm.
3. The new DECT area has now been configured. Go over to the Telephony :
Ports : Upn configuration page. Click on the table entry of the interface
card to which you have connected a DECT base station.
Configurator, Telephony: Ports: Upn
Use the Type option to determine the type of DECT base station
connected. Enter a standard designation into the Description input field.
Use the Reflective environment option to activate support of the DECT-
XQ communication mode as needed. Use Apply to confirm.
4. Repeat the steps described previously until all the Forum Gateways 560
needed are assigned to a DECT area and all the DECT base stations
connected have been configured. Then begin checking in the required
DECT terminals. To do so, go to the
Telephony : DECT : DECT phones
configuration page.
Configurator, Telephony: DECT: DECT phones