L-VIS User Manual
59
LOYTEC
Version 6.2
LOYTEC electronics GmbH
arrow). The pen button opens the event list for the selected day, the button with the arrow
pointing to the top left goes back to the weekly overview.
The information shown on this page represents the sequence of preset values which will be
scheduled on that day as a result of individual events that are applicable. Each line contains
a start time, an end time, and the name of the value preset which will be in effect during this
period of the day. The list covers the entire day, starting at midnight.
7.2.3.3 Event List
This page displays a list of all events which are applicable to the selected day. Note that an
event which is generally applicable to a certain day may not yield to a new value being
scheduled, since the event may partially or fully overlap with other, higher priority events.
Partially overlapped events may cause the start and/or end times of the actual time table to
be different from the start and end times of the individual events.
The event list is normally used to modify, add, or delete events. The following areas of the
page can be selected to execute various operations:
Single and double arrow buttons:
These buttons can be used to navigate back
and forth by one day (single arrow) or one week (double arrow) without leaving
the event list page.
Plus Button:
This button is used to add a new event. The event editor will be
opened and the new event can be entered. Note that the currently selected day has
no influence on the new event, since all data for the new event can be modified in
the event editor window.
Back Button:
The button with the arrow pointing to the top left is used to go
back to the previous page. This can be the time table or the weekly overview,
depending on how the event list was reached.
Lines in the event list:
Each line of the event list may be selected anywhere on
the line (not just the edit buttons), to open the event editor for the selected event.
This way, existing events can be modified or deleted.
Each entry in the event list can show the following information:
Start and End Time:
The start and end time of the event.
Preset Name:
The name of the value preset which should be scheduled.
Priority:
Optionally, the priority of the event (depending on available space and
the setup of the scheduler control).
Date Specification:
The dates on which this event will be active, as well as a
name for this event, if available (not supported by BACnet at the moment).
Events are sorted by their start time. In case of overlapping events, the actual sequence of
scheduled values may be different from the sequence in which the events are displayed.
NOTE:
In case of overlapping events scheduled at the same priority but with different values, it
cannot be guaranteed which of the two conflicting values will be scheduled.
7.2.3.4 Global Event List
This page is almost the same as the normal event list. The only difference is that this page
shows all events which are currently stored in the scheduler unit. Since this list is not
related to a specific date, there are no navigation buttons. Only the buttons to add a new
