National Instruments NI 9215, Процедура калибровки

Страница: 1 / 8

CALIBRATION PROCEDURE
NI 9215
This document contains the verification and adjustment procedures for the National
Instruments 9215. In this document, the NI 9215 with screw terminal and the NI 9215 with BNC
are referred to inclusively as the NI 9215. For more information about calibration solutions, visit
ni.com/calibration
.
Contents
Software Requirements............................................................................................................. 1
Documentation Requirements .................................................................................................. 2
Test Equipment......................................................................................................................... 3
Test Conditions......................................................................................................................... 3
Initial Setup............................................................................................................................... 3
Verification............................................................................................................................... 4
Accuracy Verification....................................................................................................... 4
Adjustment................................................................................................................................ 6
Accuracy Adjustment ....................................................................................................... 6
EEPROM Update ..................................................................................................................... 7
Re-Verification ......................................................................................................................... 7
Accuracy Under Calibration Conditions .................................................................................. 7
Where to Go for Support .......................................................................................................... 8
Software
Calibrating the NI 9215 requires the installation of NI-DAQmx 9.2 or later on the calibration
system. You can download NI-DAQmx from
ni.com/downloads
. NI-DAQmx supports
LabVIEW, LabWindows
™
/CVI
™
, C/C++, C#, and Visual Basic .NET. When you install
NI-DAQmx, you only need to install support for the application software that you intend to use.