L-VIS User Manual
58
LOYTEC
Version 6.2
LOYTEC electronics GmbH
following information: The time at which the preset becomes active, the time
until this preset stays active, and the name of the scheduled preset.
Event List:
This page shows a list of all events applicable to a selected day. Note
that this list does not exactly represent the presets that will be in effect on that
day. Events may overlap and it depends on the event priority which preset will
actually be scheduled.
Global Event List:
This page shows a listing of all events currently stored in the
scheduler unit. It is similar to the event list, but it is not filtered by a certain date.
Each of the pages consists of a header line with navigation buttons and a heading,
followed by the contents of the page. How these individual pages are used, is explained in
the next sections.
7.2.3.1 Weekly Overview
This page displays one week worth of schedule preview on one page. The following areas
of the page can be selected by the user to execute certain actions:
Single and double arrow buttons:
These buttons are used to navigate to the
preview of a different week. The single arrow buttons switch to the next or
previous week, whereas the double arrow buttons move by four weeks.
Plus Button:
This button is used to add a new event to the scheduler unit. A new
dialog window appears which allows the user to define the desired event. This
dialog is explained later on.
Pen Button:
This button opens the global event list.
Page Title:
Touching the page title will switch the preview to the current week.
Day Columns:
Touching one of the seven day columns can have different
effects, depending on the touch position and type:
o
Touch on a scheduled value:
Opens the event editor for the event
which corresponds to the selected value. Note that multiple areas on the
same day or on different days may correspond to the same event.
o
Short touch on a free area:
Switches to a detailed view of that day.
Depending on the configuration of the scheduler control, this can be
either the time table, or the event list.
o
Long touch on a free area:
Opens the event editor to add a new event
at the selected time and day (depends on the touch position).
Day Column Headings:
Touching the heading of a certain day column switches
to a detailed view of that day. Depending on the configuration of the control, this
will be the event list or the time table. In any case, it will be the opposite from the
page that is shown by a touch of the day column.
The schedule control can be configured to switch back to this page and show the preview of
the current week, whenever the device enters idle mode (the display is dimmed after the
user did not use the device for a while).
7.2.3.2 Time Table
This page displays a list of scheduled preset values for the selected day. The page header
contains buttons to navigate back and forth by one day (single arrow) or one week (double
