IBM X3850 X6, Инструкция по установке и обслуживанию

Страница: 606 / 1730

Telco sytems require all 4 power supplies to be populated and DC only.
Related Links:
v
“Solving power problems” on page 197
v
“Installing power supplies” on page 104
v
“Removing a 1400-watt or 900-watt hot-swap power supply” on page 247
v
“Removing a 750-watt -48 volt to -60 volt dc power supply” on page 287
v
“Replacing a 1400-watt or 900-watt hot-swap power supply” on page 248
v
“Replacing a 750-watt -48 volt to -60 volt dc power supply” on page 289
8007020c-2581ffff Sensor [SensorElementName] has transitioned to critical from a less severe state.
Explanation: IMM has reported a SMI Lane Failed.
May also be shown as 8007020c2581ffff or 0x8007020c2581ffff
Severity: Error
Alert Category: Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response: This is a UEFI detected event. The UEFI diagnostic code for this event can be found in the logged
IMM message text. Please refer to the UEFI diagnostic code in the "UEFI diagnostic code" section of the Info Center
for the appropriate user response.
Related Links:
v
“Finding the UEFI (POST) error code” on page 1666
8007020d-2582ffff Sensor [SensorElementName] has transitioned to critical from a less severe state.
Explanation: This message is for the use case when an implementation has detected a Sensor transitioned to critical
from less severe.
May also be shown as 8007020d2582ffff or 0x8007020d2582ffff
Severity: Error
Alert Category:
Critical - Other
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0522
SNMP Trap ID: 50
Automatically notify Support: No
User response: RAID Vol State :
8007020c-2581ffff • 8007020d-2582ffff
588
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide