IBM X3850 X6, Инструкция по установке и обслуживанию

Страница: 246 / 1730

Removing the full-length I/O book
This information provides instructions for removing the full-length I/O book.
About this task
To remove the full-length I/O book, complete the following steps:
Procedure
1. Read the safety information and installation guidelines, see “Safety” on page vii
and “Installation guidelines” on page 45.
2.
The full-length I/O book is hot-swappable if no adapters are installed in the
I/O book. If adapters are installed in the I/O book, you must first press the
Power button
on the I/O book and power-off all three PCIe adapter slots
before you remove the I/O book from the server. The slots LED lights will be
off when the slots are off-line.
3. Remove any external cables that are attached to the adapters.
4. Press the blue release latch downward; then, rotate the handle all the way
down and slide the I/O book out of the server.
Release latch
Handle
5. Remove the I/O book cover. Slide the cover toward the front of the server and
lift it off of the I/O book.
6.
Open the adapter retention lever.
7. Remove the adapters from the I/O book (see “Removing an adapter” on page
230).
Results
If you are instructed to return the I/O book, follow all packaging instructions, and
use any packaging materials for shipping that are supplied to you.
228
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide