IBM X3850 X6, Инструкция по установке и обслуживанию

Страница: 149 / 1730

v
User Security
Select this choice to set, change, or clear passwords. The full Setup utility menu,
enables all of the options in the User Security option. See “Passwords” for more
information.
This choice is on the full and limited Setup utility menu.
–
Set Power-on Password
Select this choice to set or change a power-on password. See “Power-on
password” on page 132 for more information.
– Clear Power-on Password
Select this choice to clear the power-on password.
– Set Administrator Password
Select this choice to set or change an administrator password. An
administrator password is intended to be used by a system administrator; it
limits access to the full Setup utility menu. If an administrator password is
set, the full Setup utility menu is available only if you type the administrator
password at the password prompt. For more information, see “Administrator
password” on page 133.
– Clear Admin Password
Select this choice to clear the Administrator Password.
v Save Settings
Select this choice to save the changes that you have made in the settings. This
choice is on the full Setup utility menu only.
v Restore Settings
Select this choice to cancel the changes that you have made in the settings and
restore the previous settings. This choice is on the full Setup utility menu only.
v
Load Default Settings
Select this choice to cancel the changes that you have made in the settings and
restore the factory settings. This choice is on the full Setup utility menu only.
v
Exit Setup
Select this choice to exit from the Setup utility. If you have not saved the
changes that you have made in the settings, you are asked whether you want to
save the changes or exit without saving them.
Passwords
This topic provides information on setting passwords in the server Setup utility.
From the User Security menu choice in the Setup utility, you can set, change, and
delete a power-on password and an administrator password. The User Security
choice is on the full Setup utility menu only.
If you set only a power-on password, you must type the power-on password to
complete the system startup and to have access to the full Setup utility menu.
An administrator password is intended to be used by a system administrator; it
limits access to the full Setup utility menu. If you set only an administrator
password, you do not have to type a password to complete the system startup, but
you must type the administrator password to access the Setup utility menu.
If you set a power-on password for a user and an administrator password for a
system administrator, you can type either password to complete the system
startup. A system administrator who types the administrator password has access
to the full Setup utility menu; the system administrator can give the user authority
Chapter 3. Configuration information and instructions
131