Table 27. Supported ML2 (Ethernet) adapters and where you can install the adapters.
Ethernet adapters
Where to install the
adapter
Notes and Features
Intel X540 ML2 quad-port 1
Gb-T Ethernet Adapter for IBM
System x
This adapter can only
be installed in slot 10
on the standard I/O
book board.
v
Port 1 on the adapter is the default port for IMM Shared
mode when enabled through UEFI.
v
This adapter provides the following features:
– Single chip, quad-port 1 Gb Base-T controller with
integrated MAC and PHY
– PCI Express v2.1 with 5.0 GT/s and 2.5 GT/s support
for x1, x2, and x4 links widths
– Pass-Through (PT) functionality via a sideband
interface
– DMTF Network Controller Sideband Interface (NC-SI)
– 1000BASE-T, 100BASE-TX, and 10Base-T link modes
– Flexible port partitioning (32 virtual functions on
quad-port or 16 virtual functions on dual-port)
Intel I350-T4 ML2 dual-port 10
Gb-T Ethernet Adapter for IBM
System x
This adapter can only
be installed in slot 10
on the standard I/O
book board.
v
Port 1 on the adapter is the default port for IMM Shared
mode when enabled through UEFI.
v
This adapter provides the following features:
– Single chip, dual port 10 Gb Base-T controller with
integrated MAC and PHY
– 12.5 watts maximum power
– Unified networking delivering LAN, iSCSI, and FCoE
over 10 Gb Base-T
– Two independent 10 Gb Base-T interfaces with SR-IOV
support
– PCI Express v2.1 with 5.0 GT/s and 2.5 GT/s support
for x1, x2, x4, and x8 links widths
– 10BASE-T, 1000BASE-T, and 100BASE-TX link modes
Emulex VFA5 ML2 dual-port
10 Gb-SFP+ Ethernet Adapter
for IBM System x
This adapter can only
be installed in slot 10
on the standard I/O
book board.
v
Port 1 on the adapter is the default port for IMM Shared
mode when enabled through UEFI.
v
This adapter supports FoD and requires a license or key
(Emulex VFA5 ML2 FCoE/iSCSI License for IBM System
x (FoD)) if you want access to FCoE and iSCSI advanced
features.
v
For this adapter, you will need supported SFP
transceivers or DAC cables to connect to your Fibre
connections.
v
This adapter provides the following features:
– Four SFI 10 Gb Base-R Ethernet interfaces
– PCIe Gen3 x8 interface
– Single Root I/O Virtualization (SR-IOV)
– Ethernet network interface (Layer 2 NIC) and TCP/IP
– Fibre Channel over Ethernet (FCoE)
– Remote Direct Memory Access (RDMA)
90
System x3850 X6 and x3950 X6 Types 3837 and 3839: Installation and Service Guide
Содержание X3850 X6
