IBM X3850 X6, Инструкция по установке и обслуживанию

Страница: 555 / 1730

80010902-0701ffff Numeric sensor [NumericSensorElementName] going high (upper critical) has asserted.
Explanation: A voltage has risen above its specified threshold (sensor SysBrd 12V, SysBrd 3.3V, or SysBrd 5V).
May also be shown as 800109020701ffff or 0x800109020701ffff
Severity: Error
Alert Category: Critical - Voltage
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0494
SNMP Trap ID:
1
Automatically notify Support: Yes
User response:
1.
(Trained service technician only) If the specified sensor is SysBrd 3.3V or SysBrd 5V, replace the system board.
2. If the specified sensor is Planar 12V, check the IMM Web event log for power-supply-related issues, and resolve
those issues.: If the problem remains, (trained service technician only) replace the system board.
Related Links:
v
“Removing the standard I/O book” on page 221
80010b01-2701ffff Numeric sensor [NumericSensorElementName] going high (upper non-recoverable) has
asserted.
Explanation: The ambient temperature has risen above its threshold. A hard shutdown has occurred.
May also be shown as 80010b012701ffff or 0x80010b012701ffff
Severity: Error
Alert Category: Critical - Temperature
Serviceable: Yes
CIM Information: Prefix: PLAT and ID: 0498
SNMP Trap ID: 0
Automatically notify Support: No
User response:
1.
Check the IMM event log for any fan or cooling related issues.
2.
Make sure that the airflow at the front and rear of the server is not obstructed and that fillers are in place and
correctly installed.
3. Make sure that the room temperature is within operating specifications.
Related Links:
v
“Server features and specifications” on page 7
80010902-0701ffff • 80010b01-2701ffff
Appendix B. Integrated management module II (IMM2) error messages
537