background image

Omneon MediaDeck

TM

 Installation Guide

This guide includes connection instructions for the following

Omneon MediaDeck Modules:

 5000 Series SD MPEG-2/DV MediaDeck Module (MDM-5001) 

• 

5220 Series SD MPEG-2 Dual I/O MediaDeck Module (MDM-5221)

• 

5320 Series HD/SD MPEG-2 Dual I/O MediaDeck Module (MDM-5321)

• 

5400 Series HD/SD MPEG-2/DV Simulcast MediaDeck Module (MDM-5401)

• 

5500 Series HD/SD MPEG-2/DV Playback MediaDeck Module (MDM-5501) 

A sample system is shown below. Customer-supplied components include the following:

 Digital VTR (if an Analog VTR is used, external A-D converters are required)

 Video Monitors

 RS-422 interconnection cables (DB-9 Male to DB-9 Male)

 Audio/Video interconnection cables suitable for SDI and AES signal transmission, and monitoring equipment

 Gigabit Ethernet Hub or Gigabit Ethernet switch

 Automation System (optional)

Note:

  For complete environmental, power, racking, and cable requirements, refer to the 

Omneon MediaDeck™ User’s Guide.

http://www.whiskeypuppy.com/pics.html

Locate the following items in your Omneon MediaDeck kits:

Sample System Diagram

Omneon MediaDeck with 

Omneon MediaDeck Module(s) factory-installed

Bezel

Eight 500-GB or 1-TB

SATA disk drives

SystemManager Platform

or Client PC

Rack Mount Kit

Interconnection Cables

Warning

:  Safe handling

of this system requires

TWO people.

Caution

:  Electrostatic discharge can damage components. Make sure to wear

an antistatic wrist strap and attach it to a metal part of the Omneon MediaDeck

chassis when performing the procedures in this guide.

Part Number 28-0134, Revision J.

Omneon and the Omneon logo are trademarks of Harmonic Inc.

*Other names and brands may be claimed as the property of others.

Copyright © 2011. Harmonic Inc. All rights reserved.

Omneon Technical Support can be contacted as follows:

For support in the Americas:

Telephone (Toll Free): +1(888) OVN SPT1 (686 7781)

Telephone (Local): +1(408) 585 5200

Fax: +1 (408) 521 2191 

Email: [email protected]

For support in Europe, Middle East, and Africa:

Telephone: +44 1252 555 450 

Fax: +44 1252 377 171 

Email: [email protected]

For support in Russia and CIS

Telephone: +7 495 506 5981

Fax: +7 495 937 8290

Email: [email protected]

For support in Japan:

Telephone: +81 3 5565 6737 

Fax: +81 3 5565 6736 

Email: [email protected]

For support in China (mainland):

Telephone: +86 10 8391 3313 

Fax: +86 10 8391 3688 

Email: [email protected]

For support in Asia Pacific (other territories):

Telephone: +65 6671 1499 

Fax: +65 6671 1454 

Email: [email protected]

For the support page on the Omneon website:

http://www.omneon.com/support

For the support server:

ftp://ftp.omneon.com/Updates/Omneon/Current/

Omneon MediaDeck Modules

Automation System (optional)

Omneon MediaDeck

SystemManager Platform

or Client PC

Digital VTR

A/V Out

Ethernet

Switch or Hub

A/V In

RS-422

Distribution

Ethernet

Host

Connections

Rack Mount Kit

MediaDeck

Technical Support

Documentation Suite

1. Apply power to the Ethernet hub or switch.

2. Apply power to the SystemManager Platform and Keyboard/Monitor Tray, or client PC.

3. From the SystemManager Platform, log on to Microsoft Windows with the user name:

    Administrator

, and the password: 

omneon

.  Both entries are case sensitive.  

 

    Note:

  If an error message appears indicating that a network connection is missing,

     click 

OK

 and continue with the power-up sequence. 

     

     If you have installed SystemManager on a client PC, log on to your client PC.

4. Apply power to the Omneon MediaDeck by connecting the AC cords to the separate power

     sources.

 

5. Check the status LEDs on the Omneon MediaDeck front panel and verify there are no problems.

     Refer to “Reading the Front Panel Status LEDs” below.

6. Apply power to the (optional) automation system.

Power Up the System

10

To run SystemManager and begin using your Omneon MediaDeck, refer to

“Running SystemManager  and Creating a File System” in the 

Omneon MediaDeck™ User’s Guide

.

Hails and Horns Magazine

Run SystemManager 

11

Caution

:  Unpack and place your Omneon MediaDeck system on a

flat anti-static surface to perform the following installation procedures

contained in this document.

To replace components for your Omneon MediaDeck,

refer to the 

Omneon MediaDeck™ Component

Replacement Guide 

in your MediaDeck kit.

The Component Replacement Guide includes the

following sections:

Replacing Components 

  Replacing the Bezel

  Replacing a Disk Drive 

  Replacing the Drive Cage

  Replacing an I/O Module

  Replacing the Processor Module

  Replacing the Chassis 

Reading the Front Panel Status LEDs

Note:

 The File System and RAID status LEDs will blink light blue until a file system 

and RAID set are created.

Front

Panel LEDs

File Transfer Ethernet 

Reference

RAID

Control Ethernet

File System

[Solid] Rebuild[s] in progress

 

No reference signal connected
Locked to external reference

Dark Blue

Light Blue

[Solid] One or more RAID sets unprotected

Off

Green

Dark Blue

Light Blue

[Solid] All RAID sets are protected

[Blink] FS not viable to start

File system initialization not complete

Off

Dark Blue

Light Blue

[Solid] File system (FS) started, read-only

[Blink] FS present but halted
[Solid] FS started, read-write

[Blink] No FS present

I/O Module status OK
I/O Module failure

Light Blue

Record in progress

Green

Status LEDs

Ethernet initialization failure
[Blink]  Ethernet hardware or software failure

Off

Dark Blue

[Solid]  Ethernet communications OK, IP address present

[Blink]  Ethernet communications problem

Light Blue

[Blink] A RAID set in the FS is compromised

Descriptions for each of the front panel status LEDs are shown below:

I/O Module Status

RAID system initialization not complete

[Blink] RAID sets present, no FS running

Off

Connect Audio and Video I/O (Continued)

8

AES Audio Out

Channel B

3/4

  RS-422

LTC

IN

OUT

A

For service only

HD or SD SDI Video Out

3/4

1/2

Chan. A

B

HD or SD SDI Video Out

Channel A

AES Audio Out

1/2

3/4

Unused

Unused

Chan. B

Unused

Unused

5500 Series HD/SD MPEG-2/DV Playback MediaDeck Module (MDM-5501)

To access the Omneon MediaDeck documentation:

ftp.omneon.com/updates/omneon/current/MediaDeck/

To access the Omneon SystemManager software and

documentation, go to:

ftp.omneon.com/updates/omneon/current/SystemManager/

Refer to the 

Omneon MediaDeck™ Read Me First

 

in your Omneon MediaDeck kit for the password to

download the documentation and software files for the

Omneon MediaDeck and SystemManger.

4. Connect an AC cord to the AC connector on the Ethernet switch (or hub).  Do not plug the AC cord

     into an AC power source yet.

Connect AC Power

9

2. Omneon MediaDecks do not have any power switches.  To take full advantage of the dual redundant 

     power supplies on the Omneon MediaDeck, ensure that separate, isolated power sources are

     available.  Connect AC cords to the two AC connectors on the Omneon MediaDeck.

1. If you are connecting to an automation system, make sure the power switch on the automation 

     system is off.  Attach an AC cord to the AC connector on the automation system.

Omneon MediaDeck 

Rear Panel

Important:

  Do not plug the AC cords into AC power sources yet.  Connecting to an AC power

source will turn on the Omneon MediaDeck.

3. Make sure that the power switch for the SystemManager Platform or client PC is off, and that the

    power switch for the Keyboard/Monitor Tray is off as well.  Attach an AC cord to the AC connector on

    your SystemManager Platform or client PC, as well as your SystemManager Keyboard/Monitor Tray.

SystemManager Platform 

Rear Panel

SystemManager Platform 

Rear Panel

Gb 1

Gb 2

8

1

2

3

4

5

6

7

Gigabit Ethernet Switch

Отзывы: