Mechanical handling
X20 system User's Manual 3.10
2669
7.3.1 Variant 1
The X20 system is completely assembled and then installed on the top-hat rail.
1. Remove X20 modules from protective packaging. Check modules for obvious mechanical damages.
2. Insert electronic module in the guides on the bus module.
Figure 817: Insert electronic module in the guides on the bus module
3. Push the electronic module and the bus module flush together.
Figure 818: Push the electronic module and the bus module flush together
4. Hang the bottom edge of the terminal block in its place on the bus module.
Figure 819: Hang the bottom edge of the terminal block in its place on the bus module
