TranStar EL-550 Service Manual Download Page 497

Page: 497 / 510

7.26 Integrated Fiber Optic Exam Light—P7915AT

Chapter 7: Accessories

TranStar® PC-100/PC-200/PC-300/PC-350/PC-400/PC-450/

Page 7 - 55

PC-500/PC-550/TR-500/SG-500/OB-450/OB-550/EL-550
Series Stretcher Service Manual (man115re)

Figure 7-30. Light Mounting Plate Assembly

19. Orient the illuminator box (A) above the light mounting plate (B), so that

the power switch (C) is facing toward the foot end of the stretcher
(see figure 7-27 on page 7-51).

20. Lower the illuminator box (A) onto the light mounting plate (B), and insert

the light mounting plate tabs (D) into the keyhole slots (E) located on the
bottom of the illuminator box (A).

21. Slide the illuminator box (A) toward the head end of the stretcher to secure

the illuminator box (A) onto the light mounting plate (B).

22. Remove the power cord (X) from its packaging container.

23. Plug the power cord (X) into the appropriate connection on the illuminator

box (A).

m115d191

Head end

Summary of Contents for EL-550































































































































































































































































































































































































































































































































Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands

TranStar EL-550, Service Manual

Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands