4.3 Electric Stretcher Siderail
Chapter 4: Removal, Replacement, and Adjustment Procedures
Page 4 - 14
TranStar® PC-100/PC-200/PC-300/PC-350/PC-400/PC-450/
PC-500/PC-550/TR-500/SG-500/OB-450/OB-550/EL-550
Series Stretcher Service Manual (man115re)
Figure 4-5. Electric Stretcher Siderail Cable Routing
14. Using the ½" open end wrench, the ratchet, and the ½" socket, remove the
two swing pivot nuts (E) and washers (D) from the swing pivot bolts (A)
that secure the siderail to the swing arms (C) (see figure 4-4 on page 4-13).
CAUTION:
Ensure that the siderail is supported on both ends. Damage to the
siderail bracket can occur if one end drops, and the other end is
positioned in the siderail bracket.
15. Support the siderail, and remove the swing pivot bolts (A).
16. Remove the siderail (F) from the swing arms (C).
17. Remove the four Oilite®
1
bushings (B) from the swing arms (C).
Replacement
1. Install the four Oilite® bushings (B) on each swing arm (C).
1. Oilite® is a registered trademark of Beemer Precision, Inc.
m115b119
