TranStar EL-550 Service Manual Download Page 455

Page: 455 / 510

7.6 Convertible Footboard

Chapter 7: Accessories

TranStar® PC-100/PC-200/PC-300/PC-350/PC-400/PC-450/

Page 7 - 13

PC-500/PC-550/TR-500/SG-500/OB-450/OB-550/EL-550
Series Stretcher Service Manual (man115re)

Storing

1. Grasp the top of the transport shelf and swing back toward the foot end of

the stretcher.

2. Ensure the convertible footboard is securely locked by tugging gently on

the shelf.

Installing as a Foot Extender

1. Remove the convertible footboard (C) from the ISS mounting sockets (B).

2. Position the convertible footboard horizontally. Make sure the LIFT latch

(A) side of the convertible footboard is facing up, and the mounting posts
are pointed toward the head end of the stretcher.

3. Slide the convertible footboard mounting posts into the extender brackets

located under the sleep surface.

4. Push the convertible footboard toward the head end until it is fully

engaged.

Removal

1. Pull the convertible footboard out of the extender brackets.

2. Swing back to a vertical position and mount into the ISS sockets (B).

Summary of Contents for EL-550































































































































































































































































































































































































































































































































Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands

TranStar EL-550, Service Manual

Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands