TranStar EL-550 Service Manual Download Page 485

Page: 485 / 510

7.23 Head Positioning Strap

Chapter 7: Accessories

TranStar® PC-100/PC-200/PC-300/PC-350/PC-400/PC-450/

Page 7 - 43

PC-500/PC-550/TR-500/SG-500/OB-450/OB-550/EL-550
Series Stretcher Service Manual (man115re)

7.23 Head Positioning Strap

The Head Positioning Strap can be attached to the Velcro®

strip and the

integrated pull handle on the sides of the articulating headrest.

Installation

1. Remove the head positioning strap (B) from the shipping bag (see figure 7-

22 on page 7-43).

Figure 7-22. Head Positioning Strap Installation

2. Determine the position of the patient’s head in the headrest pad (A).

NOTE:

Make sure the patient’s head remains still in the headrest pad (A).

3. Put the end of the head positioning strap (B) around the handle (E) and

secure with the self-locking buckle (F).

1. Velcro® is a registered trademark of Velcro Industries, BV (a Dutch corporation).

m115c163

Summary of Contents for EL-550































































































































































































































































































































































































































































































































Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands

TranStar EL-550, Service Manual

Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands