TranStar EL-550 Service Manual Download Page 487

Page: 487 / 510

7.24 Placenta Basin—P265

Chapter 7: Accessories

TranStar® PC-100/PC-200/PC-300/PC-350/PC-400/PC-450/

Page 7 - 45

PC-500/PC-550/TR-500/SG-500/OB-450/OB-550/EL-550
Series Stretcher Service Manual (man115re)

7.24 Placenta Basin—P265

The TranStar® OB/GYN Stretcher Placenta Basin is located below the foot
section, between the foot supports, and is easily removed for cleaning.

Installation

Tools required:

Ratchet

T25 Torx®

head bit

1. Using the central brake pedal, place the stretcher into the brake position.

2. Using the hilow operation pedals, raise the stretcher to its highest position.

3. Using the ratchet and T25 Torx® head bit, secure the two support bars (B)

to the underside of the upper frame assembly (C) at the foot end of the
stretcher with the four screws (A) provided (see figure 7-23 on page 7-45).

4. Install the protective plastic caps (D) on the end of the two support

bars (B).

Figure 7-23. Placenta Basin Assembly

1. Torx® is a registered trademark of Textron, Inc.

m115d186

Summary of Contents for EL-550































































































































































































































































































































































































































































































































Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands

TranStar EL-550, Service Manual

Search results

Summary of Contents for EL-550

Reviews:

Related manuals for EL-550

Brands by name

Popular brands