TAKASAGO ZX-S-H Series, Instruction Manual

Page: 45 / 192

Useful Function
------------------------------------------------------------------------------------
41
Using the Sequential Function
Toggles the output ON/OFF once the delay time,
set as the trigger of each unit for the sequential
Master unit’s “OUTPUT ON” signal, has surpassed.
Ex.）
Setting Procedures
Set Sequential ON/OFF to ON for LOCAL
Press Function “FUNC.” key.
FUNC. lamp will light.
Settings Item Number will display on the top “Number
Display” and parameters on the bottom Number Display.
Select Item Number 7 with the VOLTAGE dial, then
set the parameter to 1 with the CURRENT dial.
Set the Delay Time
ON-Delay Time and OFF-Delay Time settings
have a range of 0.00ｓ～99.99ｓ.
Factory default is 0.00s (no delay time)
Setting ON-Delay Time
Select Item Number 8 with the VOLTAGE dial.
Set ON-Delay Time with the CURRENT dial.
Setting OFF-Delay Time
Select Item Number 9 with the VOLTAGE dial.
Set OFF-Delay Time with the CURRENT dial.
It is possible to set the delay time (tdon, tdoff)
for the sequential master unit.
MEMO

ＺＸ ＃１（＋５Ｖ）
ＺＸ ＃２（＋１２Ｖ）
ＺＸ ＃ｎ（－１２Ｖ）
ＺＸ ＃１の[OUTPUT]ｷｰ
で出力をＯＮ／ＯＦＦ
ＯＮ
td1 on td1 off
td2 off
td3 off
td3 on
td2 on
ＯＦＦ
ｼｰｹﾝｼｬﾙﾏｽﾀｰ
ｼｰｹﾝｼｬﾙｽﾚｰﾌﾞ
ｼｰｹﾝｼｬﾙｽﾚｰﾌﾞ
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
⇒Continued on next page
Sequential Master
Sequential Slave
Sequential Slave
Output set ON/OFF with
the ZX-S #1 OUTPUT key
ZX-S #n(-12V)
ZX-S #2(+12V)
ZX-S #1(+5V)