TAKASAGO ZX-S-H Series, Instruction Manual

Page: 179 / 192

Calibration
------------------------------------------------------------------------------------
175
８．Press the FUNC. key and change the top Number
Display to Settings Item 34 with the VOLTAGE dial.
９． Adjust so that the digital multimeter No.2 (use for
current monitor measurement) displays a number
within the range of “±2mV” with the CURRENT dial.
１０． Press the FUNC. key to complete offset calibration
of output voltage monitor.
１１． Set the Load Switch S1 to CLOSE.
１２． Press the OUTPUT key ② to set the output to
ON.
１３．Press the FUNC. key and change the top Number
Display to Settings Item 35 with the VOLTAGE dial.
１４． Adjust so that the digital multimeter No. 2 (use
for current monitor measurement) displays
“Output Current*2”（※） with the CURRENT dial.
※For 400H/HA derives from “Output Current*2”
For 800H/HA derives from “Output Current*1”
For 1600H/HA derives from “Output Current/2”
１５． Press the FUNC. key to complete full-scale
calibration of output current monitor.
１６． This completes offset/full-scale calibration of
output current monitor.
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET