TAKASAGO ZX-S-H Series, Instruction Manual

Page: 96 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
92
SYSTem：KEYLock：MODE
：Sets LOCK Mode
Function： Sets the mode for the Key Lock on the front panel
Same settings as FUNCTION Settings Item 53
Format：SYSTem：KEYLock：MODE ＜NRｆ＞
Type：SET command, QUERY command
Parameters： ０ ・・・Only LOCK key is usable
１ ・・・Only OUTPUT and LOCK keys are usable
２ ・・・VOLT／CURR dials are non-usable (Along with this, PRESET key, FUNC key, OVP key,
and OCP key are also non-usable）
Response：Same as parameters
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・While operating as a series operation slave unit
・While operating as a parallel operation slave unit
・Sequence operation in progress
＜Ex.＞
SYST：KEYL：MODE 1
SYST：KEYL：MODE？
1
SYSTem：MONitor：MODE
：Sets Voltmeter/Ammeter Display when Output is OFF
Function： Sets the displays for the voltmeter and ammeter when output is turned OFF
Same settings as FUNCTION Settings Item 52
Format：SYSTem：MONitor：MODE ＜NRｆ＞
Type：SET command, QUERY command
Parameters： ０ ・・・Displays Measurement Value
１ ・・・Displays Set Value
Response：Same as parameters
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・While operating as a series operation slave unit
・While operating as a parallel operation slave unit
・ Sequence operation in progress
＜Ex.＞
SYST：MON：MODE 0
SYST：MON：MODE？
0