TAKASAGO ZX-S-H Series Instruction Manual Download Page 17

Page: 17 / 192

Preparation & Connecting

------------------------------------------------------------------------------------

Attaching the Output Terminal Cover

１．Hook and attach one terminal cover (both covers are identical in shape) on the upper grooves of the Output

Terminal platform.

２．Attach the support rod to the remaining terminal cover (inserting it into the center part of the cover) and

affix the rod in place by screwing an M3x6mm into it from the bottom of the cover.

３．Hook the terminal cover (with attached support post) on the lower grooves of the Output Terminal platform,

then raise and snap the terminal cover in place with the upper-half.

M3 Screw Hole

４．Fasten a M3×6mm screw from above.

Summary of Contents for ZX-S-H Series
































































































































































































Search results

Summary of Contents for ZX-S-H Series

Reviews:

Related manuals for ZX-S-H Series

Brands by name

Popular brands

TAKASAGO ZX-S-H Series, Instruction Manual

Search results

Summary of Contents for ZX-S-H Series

Reviews:

Related manuals for ZX-S-H Series

Brands by name

Popular brands