TAKASAGO ZX-S-H Series, Instruction Manual, Page: 25 / 192

Basic Operations
------------------------------------------------------------------------------------
21
Function Settings
This section covers about setting parameters for various functions. Parameters that can be set are the device
address, bitrate, parity, Output ON/OFF Toggle at external contact, current sinking functions ON/OFF,
OUTPUT settings when POWER is ON, voltmeter and ammeter display when OUTPUT is OFF, etc. For details,
see the FUNCTION Settings Items List. (page 23)
Setting Functions
Setting Procedures
Press the Function “ＦＵＮＣ” key.
FUNC. lamp will light.
The Setting Item Number will display on the top Number
Display and the parameter will be displayed in the bottom
Number Display.
Select the Item Number with the ＶＯＬＴＡＧＥ dial.
Change the Parameter with the ＣＵＲＲＥＮＴ dial.
Press the ＦＵＮＣ. key to finalize settings.
The top and bottom Number Displays will return to
measurement display mode.
It is possible to continue to change other setting items
without pressing the FUNC. key. In this case, press the FUNC.
key to confirm settings once changes are finished.
When setting the device address, bitrate, and parity, the POWER
switch must be turned OFF and ON, after settings have been set
using the FUNC key before changes can take affect.
MEMO
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
OUTPUT
PRESET OVP OCP
POWER
FUNC.
LOCAL
LOCK
DISPLAY
A B C
STORE MEMORY
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
ALARM RESET
20 60 100 LMT 40 80
ZX-S-400H
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80