TAKASAGO ZX-S-H Series, Instruction Manual

Page: 149 / 192

Maintenance
------------------------------------------------------------------------------------
145
OUTPUT
PRESET OVP OCP
POWER
FUNC.
LOCAL
LOCK
DISPLAY
A B C
STORE ME MO RY
CC
CV
OUTPUT POWER (%)
STE P
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
ALARM RE SE T
20 60 100 LMT 40 80
Push up on the arrow area
Cleaning Air Filter
Disconnect the power supply’s power cable from the input power source.
(Or, in the case of the ZX-S-400H, 800H types, remove the input power cable from the rear inlet connector.)
Remove the front ventilation panels.
Remove dust using an air gun or vacuum cleaner.
If accumulation is severe, wipe the area with a synthetic detergent diluted in water, and allow it to dry before
attaching the panel.
To remove the panel
※Example with ZX-S-400H
Cleaning Panels
Using a synthetic detergent diluted in water, wipe the panels lightly using a cloth and then wipe with a dry
cloth.
Do not use solvents such as paint thinner or benzene.
Inspecting Cables & Terminal Blocks
Please inspect for any scratches on the input power cable and for cracks and damages o the input and
output terminal blocks.
Welded Fuses
If fuses are welded there is problem with the power supply. Repairs are required. Do not exchange the fuses.