TAKASAGO ZX-S-H Series, Instruction Manual

Page: 21 / 192

Basic Operations
------------------------------------------------------------------------------------
17
Turn the CURRENT dial to adjust the Current Limit Value
Set a value greater than the required load current.
(Turn dial right to raise or left to lower set value.)
Press the PRESET key to finalize settings.
Confirms PRESET settings and returns to the measurement
display mode.
Press the OUTPUT key.
Outputs with the set settings. The OUTPUT and CV lamps will
light.
If the current limit value is set to a value lower than the
required load current, current will be restricted and constant
current will be used. (CC lamp lights)
MEMO
While the
PRESET lamp is lit, all other keys not
mentioned in the above setting procedures cannot be
used. (OUTPUT key can be used)
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
MEMO
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80