TAKASAGO ZX-S-H Series, Instruction Manual

Page: 110 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
106
ＯＴ
：Sets Output ON/OFF
Function：Sets the output ON/OFF
Format：ＯＴ＊ ＊：Set value
Set Value：
０：ＯＵＴＰＵＴ “ＯＦＦ”
１：ＯＵＴＰＵＴ “ＯＮ”
Values other than 0 or 1 result in parameter errors.
＜Ex.＞A1,OT0
TP
：Executes Breaker Trip
Function：Executes breaker trip
Format：TP＊ ＊：Set values
Set Values：
０: Stop switching
1: Execute input power relay trip (When TRIP is detected or severe breakdown)
2: Execute input power relay trip (When TRIP is detected, severe breakdown, OVP/OCP triggered)
Values other than 0, 1, or 2 result in parameter errors.
＜Ex.＞A1,TP1
●Serious failure is defined as when an alarm can be canceled via command or by panel reset (holding down the A and
C key).
(Restart device with power switch)
●Serious failure Error
See page 32 for details on WDT, OHP, AD-OV, P_ERR, BST ALM, Device Detection Failure, and Device No.
Disagreement error codes.
●This command can only be used for 1600W models.
This is valid for 400W and 800W models. However nothing will happen if executed.
Caution
