TAKASAGO ZX-S-H Series, Instruction Manual

Page: 50 / 192

Useful Function
------------------------------------------------------------------------------------
46
Linearity Compensation
This function provides a high output setting accuracy by measuring and compensating the nonlinearity of the output
caused by feedback systems or DA converters/Error Amplifiers used as a DC power supply voltage or current
reference value. This is normally used when the compensation function is turned ON (Parameter 1 or 2).
Setting Procedures
Press the Function “FUNC.” key.
FUNC. lamp will light.
Settings Item Number will display on the top “Number
Display” and parameters on the bottom Number Display.
Select Item Number 13 with the ＶＯＬＴＡＧＥ dial.
Set Compensation Mode with ＣＵＲＲＥＮＴ dial.
0＝Compensation Function is turned OFF
1＝Once compensation has concluded, the
Output is then turned ON, the set values
are changed, and the compensation value
is maintained until there is a change in the
Output mode (CV/CC).
2＝Compensates continually (200ms cycles)
Press the FUNC. key again to finish.
Returns Number Display to measurement display mode.
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80