TAKASAGO ZX-S-H Series, Instruction Manual

Page: 137 / 192

Controlling with External Analog & Contact Signals
------------------------------------------------------------------------------------
133
Output Current Control via External Voltage
Outputs current, which is proportionate to the direct
current voltage added from external voltage.
Outputs from 0 to a maximum output current of 40V for
external voltages 0 to 10V.
The external voltage uses what can produce a 1mA current.
The output current is derived from the following formula.
Output
Current[V]
＝Max. Output
Current[V]
×
The output accuracy for the external resistance,
is the set current±(0.5％
of Rated Output Current).
Connecting
Connect the power supply to accessory connector terminals No.4 and 20.
IN OUT
4 20
外部電圧
０～１０Ｖ
Setting Procedures
Set to parameter 1 (External Voltage) according to the procedure on page 130.
MAX
10V
0
外部電圧
出
力
電
流
CC_EXT/V
External Voltage[
V
]
10
Output current
External Voltage
External
Voltage