TAKASAGO ZX-S-H Series, Instruction Manual

Page: 103 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
99
SEQuence：OFF
：Sets Sequence Operating OFF Time
Function：Sets the sequence operating OFF time
Same settings as FUNCTION Settings Item １１１～１１３
Format：SEQuence：OFF[]※1,※2,※3
Type：SET command, QUERY command
Parameters：※1 ０～９９９（h）
※2 ０～５９（m）
※3 ０．０～５９．９（s）
Response：Same as parameters
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・While operating as a series operation slave unit
・While operating as a parallel operation slave unit
・ Sequence operation in progress
＜Ex.＞
SEQ：OFF[]100,10,10.0
SEQ：OFF?
100,10,10.0
SEQuence：OUTPut
：Sequence Operating Execution Frequency Finished OUTPUT OFF
Function：Sets the sequence operating execution frequency finished OUTPUT OFF
Same settings as FUNCTION Settings Item １１４
Format：SEQuence：OUTPut[]＜NRf＞
Type：SET command, QUERY command
Parameters：０・・・Invaild
１・・・vaild
Response：Same as parameters
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・While operating as a series operation slave unit
・While operating as a parallel operation slave unit
・ Sequence operation in progress
＜Ex.＞
SEQ：OUTP[]1
SEQ：OUTP?
1