TAKASAGO ZX-S-H Series, Instruction Manual

Page: 41 / 192

Useful Function
------------------------------------------------------------------------------------
37
It is possible to continue to change other setting items without
pressing the “FUNC.” key. In this case, press the “FUNC.” key to
confirm settings once changes are complete.
Startup Mode Selection
Allows you to select the optimal output startup properties for each use.
１．Constant Voltage (CV) Priority Mode
Perfect when using as a normal constant voltage power supply for testing equipment and devices.
２．Constant Current (CC) Priority Mode
Perfect when wishing to control the current of electromagnets etc. or when wishing to include the constant
current pulse to nonlinear loads such as diodes etc.
Setting Procedures
Press the Function “FUNC.” key.
FUNC. lamp will light.
Settings Item Number will display on the top Number Display
and parameters on the bottom Number Display.
Select Item Number 2 with the VOLTAGE dial.
Select either 0 or 1 with the CURRENT dial.
Set Value ０＝CV Priority Mode
Set Value１＝CC Priority Mode
Press the FUNC. key again to finish.
Confirms settings and returns the Number Display to
measurement display mode.
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
Set to 0 or 1
MEMO
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET