TAKASAGO ZX-S-H Series, Instruction Manual

Page: 84 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
80
［SOURce］：CURRent：SLEW：FALLing
：Sets CC Slew Rate Falling
Function： Sets the CC slew rate for falling
Same settings as FUNCTION Settings Item 6
Format：［SOURce］：CURRent：SLEW：FALLing ＜NRｆ＞
Type：SET command, QUERY command
Parameters：Range varies on the model and the number of parallel connected devices.
See CC Slew Rate Ranges for range settings.
Response：Same as parameters
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・While operating as a series operation slave unit
・While operating as a parallel operation slave unit
＜Ex.＞
ZX-S-400H（Idependent Operation）
CURR：SLEW：FALL 10
CURR：SLEW：FALL？
10.00
［SOURce］：MEMory：RECall
：Loads from Panel Memory
Function：Loads from panel memory（A/B/C）
Format：［SOURce］：MEMory：RECall ＜String＞
Type：SET command only
Parameters： A・・・Loads from panel memory A and overwrites current settings
B・・・Loads from panel memory B and overwrites current settings
C・・・Loads from panel memory C and overwrites current settings
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・While operating as a series operation slave unit
・While operating as a parallel operation slave unit
・ Sequence operation in progress
＜Ex.＞
MEM：REC A