TAKASAGO ZX-S-H Series, Instruction Manual

Page: 121 / 192

Using in Series/Parallel Operation
------------------------------------------------------------------------------------
117
６． Press the FUNC. Key of the Slave unit to complete
output voltage offset calibration.
７． Press the PRESET key of the Master unit. Set to
“80.00”V with the VOLTAGE dial.
（See “Using as Constant Voltage Power Supply”
under “Basic Operations” on how to do this.）
８． Press the PRESET key.
９． Press the FUNC. key of the Master unit and turn
the VOLTAGE dial to display Settings Item 38 in the
top Number Display.
10. Adjust the Slave unit's settings with the Current
dial to match the measured Master Unit's output
voltage displayed on the digital multimeter.
11． Press the FUNC. key of the Salve unit to complete
output voltage full-scale calibration.
12． This completes offset /full-scale calibration for
the output voltage.
Please return voltage set values back to normal
before use.
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
20 60 100 LMT 40 80
OUTPUT
PRESET OVP OCP
FUNC.
ALARM RESET
The Slave unit is always in the state of Output ON.
(Regardless of the output, the "OUTPUT" lamp is
always lit.)
MEMO
OUTPUT
PRESET OVP OCP
POWER
FUNC.
LOCAL
LOCK
DISPLAY
A B C
STORE
MEMORY
CC
CV
OUTPUT POWER (%)
STEP
CURRENT
STEP
VOLTAGE
PRESET FUNC. REMOTE LOCK
ALARM RESET
20 60 100 LMT 40 80
ZX-S-400L
②
②
①
②
This feat
ure is not
applicable
to H t
ype.