Using via Digital Data Communication
------------------------------------------------------------------------------------
64
Acknowledge Message
When a normal command is received, return “OK”. When an abnormal command is received, return “Error”.
Settings can be set, via command, so that no return is received when normal.
（When receiving QUERY commands, the response message becomes the Acknowledge Message.）
ZX Standard Command Details
IEEE488.2 Common Command
This section explains about the commands which conform to IEEE488.2 Common Command.
Common Command List
Command Name
Summary
Command Type
*IDN
Requests device information
QUERY Only
*RST
Resets set parameters
SET Only
＊ＩＤＮ
：Identification Query
Function：Retrieves device information (Name of Manufacturer, Name of Model, Software Version)
Format：＊IDN？
Type：QUERY command only
Response：Name of Manufacturer, Name of Model, Software Version
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・
Sequence operation in progress
＜Ex.＞
*IDN?
TAKASAGO,ZX-S-400H,1.00
＊ＲＳＴ
： Reset
Function：Resets set parameters (Factory Default Settings)
Format：＊RST
Type：SET command only
No parameters
Restrictions： Alarm response is returned for normal SET commands in the following conditions
・
Sequence operation in progress
＜Ex.＞
*RST
Summary of Contents for ZX-S-H Series
