TAKASAGO ZX-S-H Series, Instruction Manual

Page: 105 / 192

Using via Digital Data Communication
------------------------------------------------------------------------------------
101
EX Compatible Commands
EX compatible commands are commands which conform to Takasago EX Series communication command format.
Remote control is possible for only EX and ZX-S series mutal functions due to Ex and command compatiblty.
EX commands are listed below. For details on each command, see the listed page number.
SET Command List
Command
Name
Control Command Functions Page No.
Ａ Assigns device address Page 103
ＡＲ Executes alarm reset Page 103
ＣＬ Resets set parameters Page 103
ＬＣ Sets OCP current Page 104
ＬＶ Sets OVP voltage Page 104
MＣ Sets output current Page 105
MＶ Sets output voltage Page 105
ＯＴ Sets output ON/OFF Page 106
TP Executes breaker trip Page 106
Read-Back Command List
Command
Name
Read-Back Command Functions Page No.
ＴＫ０ Read-back set parameter Page 107
ＴＫ１ Read-back measurement data (Voltage/Current) Page 107
ＴＫ３ Read-back alarm information Page 108
ＴＫ４ Read-back measured voltage Page 109
ＴＫ５ Read-back measured current Page 109