Omron S8VS - MODEL 15-30-60-90-120-180-240W User Manual Download

Page: 1 / 28

Switch Mode Power Supply

S8VS

Switch Mode Power Supply

S8VS (15/30/60/90/120/180/240-W Models)

15/30-W Models

Compact, Thin Power Supplies That Mount
Just About Anywhere to Contribute to
Control Panel Downsizing

• Compact, thin size: 22.5

96.5 mm (W

D).

• Three mounting directions

(standard, horizontal, facing horizontal).

• Mounting directly onto the panel is possible.
• Safety standards:

UL508/60950-1/1604, CSA C22.2 No. 14/60950-1/213,
EN50178 (= VDE0160), EN60950-1 (= VDE0805).

60/90/120/180/240-W Models

New Models with Total Run Time Monitor in
Addition to Models with Maintenance
Forecast Monitor

• Compact size: 40

95 mm (W

H) (60-W Models).

• Status displayed on 3-digit, 7-segment display.
• Safety standards:

UL508/60950, CSA C22.2 No. 14/60950,
EN50178 (= VDE0160), EN60950 (= VDE0805).

Features Common to All Models

• Mount to DIN Rail.
• Lead-free solder.

Summary of Contents for S8VS - MODEL 15-30-60-90-120-180-240W





























Search results

Summary of Contents for S8VS - MODEL 15-30-60-90-120-180-240W

Reviews:

Related manuals for S8VS - MODEL 15-30-60-90-120-180-240W

Brands by name

Popular brands

Omron S8VS - MODEL 15-30-60-90-120-180-240W, Manual

Search results

Summary of Contents for S8VS - MODEL 15-30-60-90-120-180-240W

Reviews:

Related manuals for S8VS - MODEL 15-30-60-90-120-180-240W

Brands by name

Popular brands