SYNAPTICON SOMANET Circulo 7, Documentation

Page: 3 / 1031

1.2.2.1.7 Maximum cable lengths
1.2.2.1.8 Mating parts
1.2.2.1.8.1 Connector details and mating part numbers
1.2.2.2 Mechanical integration
1.2.2.2.1 Circulo Mounting Example
1.2.2.2.1.1 Mounting the encoder disc
1.2.2.2.1.2 Mounting a hollow-shaft secondary bearing
1.2.2.2.1.3 Routing the motor phase cables
1.2.2.2.2 Dimensions and Drawings
1.2.2.2.2.1 Dimensions
1.2.2.2.2.2 Weight and inertia of the encoder rings
1.2.2.2.2.3 Drilling patterns
1.2.2.2.2.4 Mounting a bearing
1.2.2.2.2.5 Side view with phase connectors
1.2.2.2.3 Mounting encoder rings
1.2.2.2.3.1 Axial distance tolerances
1.2.2.2.3.2 Planar displacements
1.2.2.3 Encoder Calibration
1.2.2.3.1 Encoder accuracy
1.2.2.3.1.1 Narrow angle errors (encoder system-specific non-linearity)
1.2.2.3.1.2 Wide angle error (installation-dependent non-linearity)
1.2.2.3.1.3 Detecting the encoder non-linearity
1.2.2.3.2 Calibration Procedure
1.2.2.3.2.1 Prerequisite
1.2.2.3.2.2 Performing the procedure
1.2.2.3.2.3 Troubleshooting
1.2.2.3.2.4 Encoder system diagnostic
1.2.3 LED signals
1.2.3.1 Overview
1.2.3.1.1 Legend
1.2.3.2 Status LED
1.2.3.2.1 Firmware
1.2.3.2.2 Bootloader
1.2.3.3 EtherCAT LED
1.2.4 Safety functions (STO-SBC)
1.2.4.1 Safety specifications
1.2.4.1.1 System requirements
1.2.4.1.2 Technical specifications
1.2.4.2 Safety connectors
1.2.4.3 Wiring the safety inputs
1.2.4.3.1 Cabling lenghts
1.2.4.3.2 Connection diagrams for the STO inputs
1.2.4.3.2.1 Manual drives
1.2.4.3.2.2 Safety PLC PM (Plus-Minus output) + drives
1.2.4.3.2.3 Safety PLC PP (Plus-Plus output) + drives
1.2.4.3.3 Connection diagram for the brake
90
91
91
93
94
95
96
97
99
99
103
103
106
107
109
109
111
113
114
115
116
117
118
118
118
123
125
131
131
131
132
132
133
133
134
135
135
135
138
139
139
139
140
140
141
141
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.19.0 | Built 2022-02-01 3/1031