2
Analog Input 1 -
Connect to Ground **
3
Analog Input 1 +
Single-ended 0-10 V
4
Ground
5
Analog Input 2 -
Connect to Ground **
6
Analog Input 2 +
Single-ended 0-10 V
7
5 V ***
8
10 V ****
9
Analog Input 3 -
Differential ±5 V
10
Analog Input 3 +
Differential ±5 V
11
Analog Input 4 -
Differential ±5 V
12
Analog Input 4 +
Differential ±5 V
* All Analog Inputs can be configured as single-ended 0-5 V, 0-10 V, 0-20 V or differential ±5 V, ±10 V
independently.
Upon request only, please contact
** Must be connected to Ground when the Analog Input is set to Single-Ended Mode.
It is recommended to use a separate ground cable for each single-ended analog signal/cable and twist or tie
them together.
*** This is a 5 V supply that can provide up to 100 mA for external use.
The supply is protected against short to ground and keeps the current below 400mA in a continuous short.
**** This is a 10 V supply that can provide up to 25 mA for external use.
The supply is protected against short to ground and keeps the current below 100mA in a continuous short.
1.5.3.3.3.6 EtherCAT port
Synapticon Documentation
© 2021 Synapticon GmbH | Daimlerstraße 26 | D-71101 Schönaich Documentation v 4.19.0 | Built 2022-02-01
407/1031
