manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 95

91

3 

 

Producing with the knitting machine 

3.4  Producing with knitting orders (order menu) 

3.4.2

Setting or changing counters for order menu

In the Sintral program, the knitting of different pieces or sizes can be 
controlled from a program via counters.

   

Use another cycle counter or counter:

1. Call up the "Order menu" window from the "Main menu".

The "Order menu" window appears.

2. Tap the desired column (cycle counter or counter) in the header of the 

table.

The setting window appears.

Setting window for changing cycle counters and counters

3. Assign a cycle counter or a counter.

4. Confirm entries.

5. The "Order menu" appears again.

Key

Function

Call up the "Order menu" window

End setting process and save changes

Keys for setting the counters

Do not use the counters "#1" to "#39", as they are set to "0" 
during start-up!

The values of the cycle counters and counters are copied 
from the machine at the beginning of an order. If they are 
modified during knitting, they will take effect starting with the 
next piece.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands