manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 355

351

7 

 

Repairing the knitting machine 

7.3  Replacing parts 

11. Loosen the shoulder screws (2) and screws (4) on the left and right 

sides.

Swiveling plate 

12. Swivel left and right swiveling plates (5) inward.

13. Tighten shoulder screws (2) and screws (4) evenly; the carriage part is 

raised off the needle bed in the process.

14. To release the drive brake, tap the "Rel. drive brake" key.

15. Loosen the screws on the plugs (3) and pull out the plugs.

Opened carriage assembly

16. To lower the carriage part again, loosen the shoulder screws (2) and 

screws (4) on the left and right-hand sides.

17. Remove the shoulder screws (2) and screws (4).

18. Push away the carriage assembly.

CAUTION

Damage to needles and knitting system!

There are still needles in the knitting system. If the direction 
is changed when moving the carriage assembly, the needles 
and knitting system will be damaged.

➜

Never change the pushing direction of the carriage 
assembly.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands