manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 457

453

10 

 

Machine Management Tools 

10.4  Send email directly from the machine 

The "Send email" window opens.

"Send email" window on the machine

   

Inputs

Explanation

"Delete all entries" key

(except the entry in the "from" field).

"Send email" key.

From

Sender of message. 

The machine name is entered here as a sender as 
standard.

If you are expecting an answer to the email, enter a valid 
email address here as the machine cannot receive any 
emails.

To

addressee of message.

Several addressee names are to be separated by a 
semicolon (;). 

Subject

Subject of the message.

 

Field for entering message text.

Mail appendix

 

"Unzipped" key:

In the "File name" field, displayed files are attached 
unzipped to the message.

"Zipped" key:

The files which are displayed in the "File name" field are 
zipped before they are attached to the message.

Entries in the "Send email" window

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands