manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 84

Producing with the knitting machine  

3 

Production  3.3 

80

Setting the automatic shift change:

1. Call up the "Service" menu from the "Main menu".

2. Call up "Statistics" menu.

3. Call up "Shift counter" window.

4. Call up "Additional function keys".

5. Call up the "Automatic shift change" window.

6. Turn off the switch (1) so that no checking is carried out during the input 

and no error messages are displayed.

7. Set the time.

Tap on the corresponding field and set the desired time using the slider.

8. Activate the checkbox of the desired shift.

9. Set the time for all the shifts; to do so repeat the steps 7 to 8.

10. Confirm entries.

11. Turn on the switch (1).

The entries are automatically checked.

12. Call up "Main menu".

Further information:

Copying service data [-> 171]

Call up the "Automatic shift change" window

Confirm entries

Call up "Main menu"

➜

The shift times may not overlap.

➜

The total time is to be 24 hours.

If the actual working time is less than 24 hours, then an 
additional shift that covers the remaining time is to be 
determined.

➜

Set the time and the time zone on the knitting machine if 
necessary, see page [

 394].

Key

Function

Keys for setting the automatic shift change

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands