manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 191

187

4 

 

Adjusting knitting machine 

4.2  Advanced adjustments 

8. Remove the carriage part in order to replace the cams.

Replace cams for wide coupling

9. Place carriage part on contact surface and assembly with carriage 

assembly.

10. Close the rear panel.

11. Switch on 40 V power supply.

12. Call up the "Main menu".

13. Call up the "Service" menu.

14. Call up the "Reference runs" window.

15. Press the "SR!>" key and start the machine with the engaging rod.

The carriage assembly runs in the creep speed until it automatically 
stops and the message "Reconfiguration" appears on the display. 
The control adjusts to the new coupling width. After a short time the 
message disappears again.

16. Move the carriage to the left. Thereby in the window "Reference runs" 

tap on the key "S<" and start machine with the engaging rod.

17. Stop the machine when the left carriage is outside the needle bed.

18. In the window "Reference runs" tap on the key "S>". Pull up the 

engaging rod for short. The carriages may run only a few centimeters 
towards right.

The reference run is completed.

19. Load the knitting program.

Couple carriage assembly 

narrow

1. Program an empty row and fix the knitting instruction.

2. Start the machine with the engaging rod and stop it again when the 

carriage is located shortly after the left reversing position.

3. Remove the carriage part in order to replace the cams.

Replace cams for narrow coupling

4. Place carriage part on contact surface and assembly with carriage 

assembly.

If the carriage assembly operate coupled wide, the needles 
between both fabrics and at the right edge next to the right 
fabric must be free of fabric.

All yarn carriers must be positioned. Calling up yarn carrier 
assignment.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands