manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 102

Producing with the knitting machine  

3 

Eliminating errors in the fabric  3.5 

98

3.5.2

Threading up thread into yarn carrier

   

1. Call up "Manual interventions" window.

2. Tap the "YC bolt up" key.

3. Note the position of the yarn carriers, push the yarn carriers below the 

carriage and thread.

4. Push the yarn carriers into their previous position again.

5. Tap the "YC bolt bottom" key.

6. To move the carriage assembly slowly, pull the engaging rod slightly 

toward the front.

7. When knitting slowly, make sure that the thread is laid in the needles.

8. To continue knitting, start the machine with the engaging rod.   

 - or - 

➜

If the fabric is defective, call up the "Machine start" window and tap the 
"SP from line 1" key to knit the fabric again.

Key

Function

Call up "Manual interventions" window

Call up "Machine start" window

Keys for threading up thread into yarn carrier

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands