Stoll CMS 730 S Operating Instructions Manual Download Page 212

Page: 212 / 468

Adjusting knitting machine

Advanced adjustments 4.2

208

Change the opening angle of the float slider:

1. Loosen the screw (1) with an Allen key (SW 3).

2. Using the Allen key move the screw and with it the float slider

downward.



The end of the float slider protrudes from the base plate.

3. Tighten the screw (1).

4. Repeat the process on the other side of the holding-down jack control.

5. Repeat this operation with all the holding-down jack controls of the

machine.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands

Stoll CMS 730 S, Operating Instructions Manual

Search results

Summary of Contents for CMS 730 S

Reviews:

Brands by name

Popular brands