manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 45

41

2 

 

Description of knitting machine 

2.7  Main take-down 

2.7.2

Control devices (fabric take-down)

The following parameters are controlled on the fabric take-down:

   

Further information:

Adjusting sensor mechanism * [-> 164]

Parameter

Control

Speed of the take-down 
roller

The rotating speed of the take-down rollers is 
constantly measured. If the deviation from the upper 
or lower limit is too large, the knitting machine stops. 
The limit values are infinitely programmable.

Wrapping around loose 
threads (1)

Four yarn deflectors (accessory) prevent loose 
threads from wrapping around the fabric take-down 
rollers.

Wrapping around of fabric 
(1)

A winding plate prevents the fabric from wrapping 
around the fabric take-down rollers. If the fabric 
nevertheless wraps around, the knitting machine 
stops.

Throwing off of fabric (1)

Four fabric sensors (accessory) scan the fabric 
between the needle bed and the fabric take-down. 
They can be moved as desired over the entire 
working width. If the fabric is ejected, the knitting 
machine stops.

Control devices on the fabric take-down

(1) not in the case of machines with comb take-down

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands