manualshive.com logo in svg

Stoll CMS 730 S, Operating Instructions Manual

Share
Download
Stoll CMS 730 S Operating Instructions Manual Download Page 368

Repairing the knitting machine  

7 

Replacing parts  7.3 

364

Mount intarsia yarn carrier:

1. Stop the carriage assembly into the left reversing position.

Yarn carrier limiter

2. Loosen the screws (3) of the yarn carrier limiter.

3. To remove the yarn carrier limiters, turn the screws (3). The yarn carrier 

limiters can be removed and mounted in any position.

4. Shift normal yarn carrier to the right to replacement point (A) and 

remove it.

5. Mount the intarsia yarn carriers and push them into their starting 

positions. To do this, press the clamp (1) outward or the lifter (2) inward.

Intarsia yarn carrier

6. Place the yarn carrier limiter on the rails so that the ramp faces outward.

7. Position the yarn carrier limiters of yarn carriers in a staggered way and 

screw them on tight.

Summary of Contents for CMS 730 S





















































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands